Phone 01698 352 751 / UK wide service

  • Ground Access

Ground Access & Protection

DTH MK1 PANEL

Dimensions (Width x Length)

3000mm x 2497mm

Box Section Properties

Width of section : 253mm

Depth of section: 54mm

Weight

275kg per panel

Usable Area When Joined to Other Panels

(Width x Length) 3000 mm x 2401mm : 7.2sqm

Mechanical properties and strength Calculations

Allow 6005AT6

Yield strength of alloy 215N/mm2 minimum value

Ultimate tensile strength 255N/mm2 minimum value

Hardness of alloy 85 Brinell

MK1_thumb

DTH MK2 PANEL

Suitable for

 Heavy Vehicles, Pedestrians

Features

Counter Sunk Bolt Heads, Hidden Cross Plates, Anti Slip Surface

Load Bearing Capacity

250 tonne point load

1000 tonne gross train weight over ground 2% CBR

Dimensions (Width x Length)

3000mm x 2497mm

Box Section Properties (Width x Depth)

253mm x 53mm

Weight

265kg per panel

Usable Area When Joined to Other Panels

(Width x Length) 3000 mm x 2401mm : 7.2sqm

mk2_thumb2 mk2_thumb1

Designed to reduce trip hazards and meet the needs of both pedestrian and vehicular use, our latest aluminium roadway panels have been manufactured to allow all cross plates and bolt heads to be hidden beneath the surface. These panels have also been manufactured with an aggressive underside which can be installed face up to provide even greater traction for large vehicles on the steepest of hills.

Bog mats (ekki mats)


bog-mat

Excavator/Crane Mats are used to provide access for both rubber and tracked vehicles to areas with difficult ground conditions. They are also used to reduce axle weight pressures and reduce the risk of damage where access is required over underground services. These mats are suitable for most types of rubber tyred or tracked vehicles. As a guide only, this type of mat may be used to support evenly distributed weights of up to several hundred tonnes dependant on ground conditions.